Say goodbye to the old look -- QNAP Security is launching an all-new site very soon. Start using it right now! [Go]
About QNAP Security Products News Center Downloads Applications Online Support
Warranty & Service
Online Support Form
Homepage > Online Support
If the recording function of VioStor is not working properly, what should I do?
Applied Models:
  • NVR-101
  • NVR-1012
  • NVR-104P
  • NVR-104V
  • VioStor-101A
  • VioStor-101P
  • VioStor-101V
  • VioStor-2008
  • VioStor-2012
  • VioStor-201A
  • VioStor-201P
  • VioStor-201V
  • VioStor-5012
  • VioStor-5020
  • VioStor-8040
  • VioStor-8040U-RP
  1. Make sure the hard disk tray is correctly locked in VioStor.
  2. When only one hard disk is installed, make sure the disk is installed in the tray of HDD1 (two-bay model).  The HDD1 should be installed on top of the HDD2.
  3. Check if the recording function is enabled in “Camera Configuration” page (the function is enabled by default).  Make sure the IP address, name and password are correct.
  4. If the above items are verified to work properly while the status LED flashes green, the hard disk(s) may be damaged or cannot be detected.  Please turn off the server and install a new hard disk.

Note: If you have updated the configurations of VioStor, recording will be stopped temporarily and restart again shortly.

Question ID:434
For more technical support, please contact us.
| Home | About QNAP Security | Privacy Policy | Terms of Use | Contact us | Site Map |
 Asia - Taiwan QNAP Systems, Inc.     TEL: +886-2-2641 2000      FAX: +886-2-2641 0555
Copyright ©2011; QNAP Systems, Inc. All Rights Reserved. This site is bestviewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+