QNAPSecurity  
About QNAP Security Products News Center Downloads Applications Online Support
FAQ
Warranty & Service
Online Support Form
 


Support (English and Chinese only)

qnapskype
Support, Service Hours:
09:30~ 24:00 (GMT + 8)
 
 
Homepage > Online Support
How to expand the storage capacity of VioStor-101 and NVR-104 by the eSATA port?
Applied Models:
  • NVR-101
  • NVR-1012
  • NVR-104P
  • NVR-104V
  • VioStor-101A
  • VioStor-101P
  • VioStor-101V

 

Answer:

You may refer to the steps below:

  1. Back up the data on the VioStor to an external storage device.
  2. Connect an eSATA disk to the eSATA port of the VioStor-101 and NVR-104.
  3. Login the administration page and go to “Device Configuration”.
  4. Create a RAID 0 disk volume or linear disk volume with the internal hard drive of the VioStor and the eSATA disk.

Warning: To create a RAID 0 disk volume or linear disk volume, the drives must be formatted and all the data will be cleared. Make sure you have backed up the recording data before formatting the drives.

2009/6/22
Question ID:466
For more technical support, please contact us.
 
QNAPSecurity
| Home | About QNAP Security | Privacy Policy | Terms of Use | Contact us | Site Map |
 Asia - Taiwan QNAP Systems, Inc.     TEL: +886-2-2641 2000      FAX: +886-2-2641 0555
Copyright ©2011; QNAP Systems, Inc. All Rights Reserved. This site is bestviewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+