The VioStor, IP cameras, and the PC are all in the same LAN (Local Area Network).

Please follow the steps below to install the NVR.

1. Plan the IP address and port of the NVR and the camera.
   

   Device	IP Address
   VioStor	192.168.1.100
   Camera 1	192.168.1.101
   Camera 2	192.168.1.102
   Camera 3	192.168.1.103
   Camera 4	192.168.1.104
   PC	192.168.1.200

2. Install the IP camera. Please refer to the user guide of the IP camera for the network configuration.
3. Install and configure the NVR.
   When the NVR (VioStor) and the IP cameras are in the same LAN, you can use the default port settings.

Note:

1. The “IP address” is for the VioStor to acquire the streaming from the VioStor directly and for browsing by LAN users.
2. The “WAN IP Address” is for remote access to the monitoring page of the VioStor over the Internet. If your IP camera is installed behind the NAT router, enter the public IP address (or URL) and configure the port forwarding correctly.