Say goodbye to the old look -- QNAP Security is launching an all-new site very soon. Start using it right now! [Go]
About QNAP Security Products News Center Downloads Applications Online Support
Warranty & Service
Online Support Form
Homepage > Online Support
My VioStor, IP cameras, and the PC are all in the same LAN, and I want to allow users to connect the NVR from remote PC over the Internet. How to install the NVR in different network environment for remote monitoring?
Applied Models:
  • NVR-101
  • NVR-1012
  • NVR-104P
  • NVR-104V
  • VioStor-101A
  • VioStor-101P
  • VioStor-101V
  • VioStor-2008
  • VioStor-2012
  • VioStor-201A
  • VioStor-201P
  • VioStor-201V
  • VioStor-5012
  • VioStor-5020
  • VioStor-8040
  • VioStor-8040U-RP
  1. The VioStor, IP cameras, and the PC are all in the same LAN.
  2. Allow users to connect the NVR from remote PC over the Internet.

 Please follow the steps below to install the NVR.

  1. Plan the IP address and port of the NVR and the camera.
  2. LAN Device IP Address/ Port Mapped Port on the Router
    A Public IP of the router  
    LAN IP of the router  
    Camera 1
    Camera 2
    Camera 3
    Camera 4
    B Remote PC  

  3. Install the IP camera. Please refer to the user guide of the IP camera for the network configuration.
  4. Configure the router/ virtual server/ firewall
    To allow remote PC to access the VioStor and the IP cameras, you must configure the port mapping or virtual server of the router. The sample settings are as below:
    HTTP port:
    From Forward to
  5. Install and configure the NVR (VioStor)
    Enter the IP address of the camera in the “IP address” field of the “Camera Settings” page of the VioStor. Then enter the Public IP and the port number of the camera configured on the router in “WAN IP” and “Port” fields on the “Camera Settings” page of the VioStor.
    Note: The LAN IP and the WAN IP of the IP camera must be entered.


  1. The “IP address” is for the VioStor to acquire the streaming from the VioStor directly and for browsing by LAN users.
  2. The “WAN IP Address” is for remote access to the monitoring page of the VioStor over the Internet. If your IP camera is installed behind the NAT router, enter the public IP address (or URL) and configure the port forwarding correctly.
  • To access the VioStor remotely by FTP (port 21), configure the following settings:
    From Forward to
  • After changing the settings, enter the address in the browser to access the VioStor over the Internet: http://
  • If you have configured port 80 to VioStor, enter the address to access the VioStor (the default port of HTTP is 80): http://
  • To use DDNS if this network environment, enter the DDNS settings on the router, but not on the VioStor.
Question ID:495
For more technical support, please contact us.
| Home | About QNAP Security | Privacy Policy | Terms of Use | Contact us | Site Map |
 Asia - Taiwan QNAP Systems, Inc.     TEL: +886-2-2641 2000      FAX: +886-2-2641 0555
Copyright ©2011; QNAP Systems, Inc. All Rights Reserved. This site is bestviewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+