|
When you have installed the VMobile and connected your Windows PDA phone to the network, you can use the VMobile to connect to the VioStor NVR.
Follow the steps below to use VMobile on the PDA phone. Note that you must enable Internet access on the phone first.
- Open MobileNVR from the VMobile folder on the phone.
If your phone runs Windows Mobile 5, please open MobileNVR from the WM5 folder. If it runs Windows Mobile 6, open MobileNVR from the WM6 folder.
- Enter the IP address or the domain name of the NVR. Enter the correct port number (if necessary), the login user name and password. Press "OK" or the Call key on the phone to login. Press "Cancel" to exit the program.
| Default User name: |
admin* |
| Default Password: |
admin |
* If you are connecting to VS-201/ VS-101/ NVR-104, the login name is "administrator" and the login password is "admin".
Note: Check the option "Remember server name" to remember the server IP/ name on the PDA phone (enabled by default). Select to remember the login name and the password or not (disabled by default).
- When you have successfully logged in the VioStor, the main menu page is shown.
You can start to enjoy the convenience of VMobile.
|
