QNAPSecurity  
About QNAP Security Products News Center Downloads Applications Online Support
CMS Solution
VSM-2000
VSM-4000U-RP
NVR Solution
VS-12164U-RP Pro+
VS-12156U-RP Pro+
VS-12148U-RP Pro+
VS-12140U-RP Pro+
VS-12164U-RP Pro
VS-12156U-RP Pro
VS-12148U-RP Pro
VS-12140U-RP Pro
VS-8148U-RP Pro+
VS-8140U-RP Pro+
VS-8132U-RP Pro+
VS-8124U-RP Pro+
VS-8148U-RP Pro
VS-8140U-RP Pro
VS-8132U-RP Pro
VS-8124U-RP Pro
VS-8148 Pro+
VS-8140 Pro+
VS-8132 Pro+
VS-8124 Pro+
VS-6120 Pro+
VS-6116 Pro+
VS-6112 Pro+
VS-4116U-RP Pro+
VS-4112U-RP Pro+
VS-4108U-RP Pro+
VS-4116 Pro+
VS-4112 Pro+
VS-4108 Pro+
VS-2112 Pro+
VS-2108 Pro+
VS-2104 Pro+
VS-2108L
VS-2104L
VS-2008L
VS-2004L
Storage Appliance Server
WB-1600U-RP
WB-1200U-RP
Utility
QNAP Finder
VioStor Player
VMobile (for Android Mobile Device)
VMobile (for Apple Mobile Device)
VMobile (for Windows Mobile 6.1, 6.5 Device)
Project Only - NVR
VS-8040U-RP
VS-8032U-RP
VS-8024U-RP
VS-8040
VS-8032
VS-8024
VS-6020 Pro
VS-6016 Pro
VS-6012 Pro
VS-5020
VS-5012
VS-4016U-RP Pro
VS-4012U-RP Pro
VS-4008U-RP Pro
VS-4016U-RP
VS-4016U-SP Pro
VS-4016 Pro
VS-4012 Pro
VS-4008 Pro
VS-2012 Pro
VS-2008 Pro
VS-2004 Pro
VS-2012
VS-2008
VS-201P
VS-201V
VS-101P
VS-101V
NVR-104P
NVR-104V
NVR-101
NVR-1012
Project Only - Accessory
QBack-25
QBack-25S
QBack-35S
Online Tutorials
Comparison Table
Compatibility
Homepage > Products > VS-4016U-RP Pro VioStor NVR
VS-4016U-RP Pro VioStor NVR
Features Hardware Spec. Software Spec. Package Contents Applications Comparison
Downloads Datasheet FAQ Where to Buy Compatibility Gallery
Applications
Configuration Examples

Environment 1: VioStor, IP Camera and monitoring PC are all in the same network.

Network Surveillance Installation for SOHO and SMB

  IP Address
VioStor 192.168.1.1
PC 192.168.1.100
Camera 1 192.168.1.101
Camera 2 192.168.1.102
Camera 3 192.168.1.103

In the example, just add the camera to VioStor by entering the cameras' IP address.

Environment 2: VioStor and IP camera are installed behind the router, while the monitoring PC is located remotely.

  IP Address Mapped port in router
VioStor 192.168.1.1 8000
Camera 1 192.168.1.101 8001
Camera 2 192.168.1.102 8002
Camera 3 192.168.1.103 8003
Router public IP 219.87.144.205  
PC 10.8.10.100  

In this example, to allow a remote PC to connect to VioStor and the cameras, you need to:
Step 1. Set up port mapping (virtual server) on the router.

From Forward to
219.87.144.205:8000 192.168.1.1:80
219.87.144.205:8001 192.168.1.101:80
219.87.144.205:8002 192.168.1.102:80
219.87.144.205:8003 192.168.1.103:80

Step 2. Add camera to VioStor by entering the IP address of the camera in the "IP Address" settings, and the public IP address of the router and the mapped ports of the camera to the "WAN IP Address" settings.

Note: When configuring the network camera, WAN IP and LAN IP must be entered.

To open FTP (port 21) and SMB (port 445) of VioStor on WAN, you have to set the following port mapping settings:

From Forward to
219.87.144.205:21 192.168.1.1:21
219.87.144.205:139 192.168.1.1:139
219.87.144.205:445 192.168.1.1:445

After finishing the above two steps, you can access VioStor via WAN by entering the IP address http://219.87.144.205:8000 in the IE browser. Then login VioStor via the correct user name and password.

If the port specified to VioStor is 80, you can enter http://219.87.144.205 to access VioStor as the default port of HTTP is 80.

Note: If the router does not use a fixed IP, you will need to configure DDNS on the router. Other configurations are the same as above.

Environment 3: VioStor and IP camera are all located remotely.

  IP Address
VioStor 219.87.144.205
Camera 1 61.62.100.101
Camera 2 61.62.100.102
Camera 3 61.62.100.103

In this example, just add the camera to VioStor by adding its IP address to the "IP Address" settings.

Note: If there is a particular port for connecting the camera, please specify the port in VioStor configuration.

Environment 4: VioStor and IP camera are installed behind the router

  IP Address
VioStor 1 192.168.1.101
VioStor 2 192.168.1.102
VioStor 3 192.168.1.103
Router public IP 219.87.145.205

In the example, to allow a PC which is located remotely to access each VioStor via FTP, you need to:

Step 1. Set up port mapping (virtual server) on the router

  From Forward to
VioStor 1 219.87.145.205:2001 192.168.1.101:21
VioStor 2 219.87.145.205:2002 192.168.1.102:21
VioStor 3 219.87.145.205:2003 192.168.1.103:21

You could directly connect VioStor 1 via FTP by ftp://219.87.145.205:2001
You could directly connect VioStor 2 via FTP by ftp://219.87.145.205:2002
You could directly connect VioStor 3 via FTP by ftp://219.87.145.205:2003

Step 2. Enable FTP Port Mapping in VioStor
If you want to connect each VioStor via FTP by clicking button in playback page of each VioStor, you need to enable FTP port mapping in Network Settings > File Services > FTP Service on the system administration page and set the mapped port number.

  Mapped Port
VioStor 1 2001
VioStor 2 2002
VioStor 3 2003

After finishing the above two steps, you can access VioStor via FTP by entering the IP address in the IE browser or clicking button in playback page. Then login VioStor via the correct user name and password.

 
QNAPSecurity
| Home | About QNAP Security | Privacy Policy | Terms of Use | Contact us | Site Map |
 Asia - Taiwan QNAP Systems, Inc.     TEL: +886-2-2641 2000      FAX: +886-2-2641 0555
Copyright ©2011; QNAP Systems, Inc. All Rights Reserved. This site is bestviewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+